Izudin Dugic

Associate Professor

Department of Mechanical Engineering Faculty of Technology

izudin.dugic@lnu.se

+46 470-70 88 16

+46 72-231 77 21

Save contact Download image

My research groups

Mechanical Engineering The research in the field of mechanical engineering is broad and has its main focus in six areas: structural dynamics, material science, industrial economics, terotechnology,…

My completed research projects

Project: Competence needs and courses for professionals in IT and competitive production 2.0 The purpose of the project is to further develop the common marketing platform for courses for…
Project: Smart Industry The goal of this project is to develop courses in mechanical engineering at advanced level according to the industry's competence requirements. The project is aimed at…

Publications

Article in journal (Refereed)

Bagni, T., Ahl, A., Almström, M., Canale, M., Dugic, I., et al. (2024). Modeling Results of the Quench Behavior of a Nb-Ti Canted-Cosine-Theta Corrector Magnet for LHC. IEEE transactions on applied superconductivity (Print). 34 (5).
Status: Published
Pepitone, K., Kirby, G., Olvegard, M., Ahl, A., Almström, M., et al. (2023). Design and Fabrication of a Canted-Cosine-Theta Double Aperture Orbit Corrector Dipole for the LHC. IEEE transactions on applied superconductivity (Print). 33 (5).
Status: Published
Pepitone, K., Kirby, G., Ruber, R., Ahl, A., Canale, M., et al. (2022). Design of a Canted-Cosine-Theta Orbit Corrector for the High Luminosity LHC. IEEE transactions on applied superconductivity (Print). 32 (6).
Status: Published
Dioszegi, A., Svidro, P., Elmquist, L., Dugic, I. (2016). Defect formation mechanisms in lamellar graphite iron related to the casting geometry. International Journal of Cast Metals Research. 29 (5). 279-285.
Status: Published
Dugic, I., Dioszegi, A., Svensson, I.L. (2009). Ekspanzijska penetracija metala na konkavnim povrsinama cilindarskih glava od sivog lijeva. Časopis za praćenje razvoja i dostignuća ljevarske tehnologije. 4 (51). 87-93.
Status: Published
Diószegi, A., Elmquist, L., Orlenius, J., Dugic, I. (2009). Defect Formation of Gray Iron Casting. International Journal of metalcasting. 3 (4). 49-58.
Status: Published
Dugic, I., Dioszegi, A., Svensson, I.L. (2009). Ekspanzijska penetracija metala na konkavnim povrsinama cilindarskih glava od sivog lijeva. Časopis za praćenje razvoja i dostignuća ljevarske tehnologije. 4 (51). 87-93.
Status: Published
Diószegi, A., Dugic, I., Svensson, I.L. (2007). Metal Expansion Penetration on Concave Casting Surfaces of Grey Cast Iron Cylinder Heads. Transactions of the American Foundry Society. 115. 609-615.
Status: Published
Svensson, I.L., Dugic, I. (1999). Modelling of volumes in cast iron solidification to predict shrinkage and expansion defects. International Journal of Cast Metals Research. 11 (6). 489-494.
Status: Published
Dugic, I., Svensson, I.L. (1999). An investigation of the effect of inoculants on the metal expansion penetration in grey iron. International Journal of Cast Metals Research. 11 (5). 333-338.
Status: Published

Conference paper (Refereed)

Dugic, I. (2024). How Various Inoculants and Their Amount Influence on the Metal Expansion Penetration in Grey Cast Iron Component. TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings. 1052-1066.
Dugic, I. (2023). How to Prevent Porosity Defects in Steel Casting Component. Materials Processing Fundamentals 2023. TMS 2023. 83-95.
Dugic, I. (2020). How to Prevent Gas Porosity Defects in Castings of Stator Housing in Grey Cast Iron. TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. 1139-1148.
Dugic, I. (2019). Effect of Casting Temperature on the Surface Finish of Grey Iron Castings. Materials Processing Fundamentals 2019. 87-95.
Dugic, I., Berndt, R., Josefsson, S., Hedström, M. (2018). Non-metallic inclusion and their effect on fatigue strength for case-hardened carbon steel in gears. TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2018. 123-133.
Dugic, I. (2017). Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron. TMS 2017 146TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS. 475-482.
Dugic, I., Henriksson, F., Strebel, C., Kosmaz, O., Seifeddine, S. (2016). On the Effects of Alloying Element Range on the Mechanical Properties of Recycled Aluminium Alloy EN AB-46000. Light Metals 2016. 115-120.
Diószegi, A., Svidró, P., Elmquist, L., Dugic, I. (2015). Defect formation mechanisms in lamellar cast iron related to the casting geometry. Advances in the science and engineering of casting solidification : An MPMD symposium honoring Doru Michael Stefanescu. 251-259.
Dugic, I. (2015). Effect of cooling rate on the casting defects of high chromium white cast iron for the impellers. Zbornik povzetkov referatov 55. mednarodnega livarskega posvetovanja, Portorož 2015. 35.
Svidró, P., Elmquist, L., Dugic, I., Diószegi, A. (2014). Characterization of primary dendrite morphology in complex shaped lamellar cast iron castings. The 10^th International Symposium on the Science and Processing of Cast Iron, SPCI10, November, 2014, Mar del Plata, Argentina. 1-7.
Dugic, I. (2013). Ductile iron for the wind power industry. . 12.
Dugic, I. (2011). Inoculation of Grey Cast Iron and the Influence on Metal Expansion Penetration. Proceedings book of the 11th International foundrymen conference Foundry Industry – Significance and Future Challenges. 378-389.
Dugic, I. (2010). Metal Expansion Penetration on Casting Components of Grey Cast Iron. .
Diószegi, A., Elmquist, L., Orlenius, J., Dugic, I. (2009). Defect Formation at Casting of Gray Iron Components. Proceedings of the Carl Loper Cast Iron Symposium, Madison, Wisconsin, US.
Attila, D., Elmquist, L., Orlenius, J., Dugic, I. (2009). Defect Formation of Grey Cast Iron.
Dugic, I. (2009). Metal Expansion Penetration on Concave Casting Surfaces of Cylinder Heads Cast in Grey Cast Iron. . 8.
Diószegi, A., Dugic, I. (2006). The Mechanism of Metal Expansion Penetration in Gray Cast Iron. .

Article in journal (Other academic)

Dugic, I., Diozegi, A., Svensson, I.L. (2010). Metal Expansion Penetration on Concave Casting Surfaces of Grey Cast Iron Cylinder Heads. International Foundry Research/Giessereiforschung. 62 (1). 38-23.
Status: Published
Dugic, I., Diozegi, A., Svensson, I.L. (2010). Metal Expansion Penetration on Concave Casting Surfaces of Grey Cast Iron Cylinder Heads. International Foundry Research/Giessereiforschung. 62 (1). 38-23.
Status: Published
Diószegi, A., Dugic, I., Svensson, I.L. (2007). Penetrationsfehler an konkaven Gussteiloberflächen von Grauguss-Zylinderköpfen (Penetration errors casting concave surfaces of grey cast iron cylinder heads). Giesserei-Praxis. 58 (11). 450-454.
Status: Published

Conference paper (Other academic)

Dugic, I. (2014). Effect of molybdenum content and pouring temperature on the casting defects of high chromium white cast iron for the impellers. Proceeding book of the 14th international foundrymen conference. 17:1-17:8.
Holmgren, M., Dugic, I., Liljenfors, T. (2014). Purification of hydrogen in aluminium recycling. Proceeding book of the 14th international foundrymen conference. 17:1-17:8.
Dugic, I. (2014). White Cast Iron for the Impellers. Conference Proceedings of the 54th International Foundry Conference Portorož 2014. 71-72.

Doctoral thesis, monograph (Other academic)

Dugic, I. (2006). The mechanisms of metal expansion penetration during solidification of grey cast iron. Doctoral Thesis. Institutionen för konstruktions- och produktionsteknik. 36.

Report (Other academic)

Dugic, I. (2022). Microscopic investigation of test specimen 2 after thermal shock test. 10.
Svidró, P., Elmquist, L., Dugic, I., Diószegi, A. (2013). Investigation of cooling rate dependent dendrite morphology in hypoeutectic lamellar cast iron. Jönköping, School of Engineering. 7.
Svidró, P., Elmquist, L., Dugic, I., Diószegi, A. (2013). Investigation of cooling rate dependent dendrite morphology inhypoeutectic lamellar cast iron. Jönköping, School of Engineering. 7.
Dugic, I., Diószegi, A., Svensson, I.L. (2006). Metal Expansion Penetration on Concave Casting Surfaces of Grey Cast Iron Cylinder Heads. Jönköping, Tekniska Högskolan. 9.
Dugic, I., Diószegi, A., Svensson, I.L. (2005). The Influence of Inoculation on the Metal Expansion Penetration With Respect to the Primary and Eutectic Solidification. Jönköping, Tekniska Högskolan. 22.
Dugic, I., Svensson, I.L. (1999). An investigation of the effect of five different inoculants on the metal expansion penetration in grey cast iron. Jönköping, Ingenjörshögskolan. 12.
Dugic, I., Svensson, I.L. (1999). The effect of chemical composition on the metal expansion penetration in grey cast iron. Jönköping, Ingenjörshögskolan. 13.
Dugic, I., Svensson, I.L. (1999). The effect of inoculant amount and casting temperature on metal expansion penetration in grey cast iron. Jönköping, Ingenjörshögskolan. 10.
Dugic, I., Svensson, I.L. (1998). An investigation of the effect of inoculants on the metal expansionpenetration in grey iron.

Licentiate thesis, comprehensive summary (Other academic)

Dugic, I. (1999). Metal Expansion Penetration During Solidification of Grey Cast Iron. Licentiate Thesis. Linköping, Institutionen för konstruktions- och produktionsteknik. 32.

Conference paper (Other (popular science, discussion, etc.))

Dugic, I., Karlsson, C. (2011). GIFA 2011 – New opportunities. Swedish Foundry Technical Association Conference.

Report (Other (popular science, discussion, etc.))

Dugic, I. (2021). Microscopic investigation of the test specimen after the thermal shock test. Växjö, Linnéuniverstitetet. Institutionen för maskinteknik. 13.